Oil & Gas Equipment
Kill Manifold
Manifold used to inject heavy drilling fluid into a well to balance pressure and control blowout risks. Designed to API 16C with 14-70MPa ratings.

The kill manifold provides a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. Using blowdown lines connected to the kill manifold, wellhead pressure can also be released and other extinguishing agents can be injected.
It consists of check valves, gate valves, pressure gauges and pipelines. One end is connected to the drilling spool and the other to the pump. Check valves allow injection but prevent backflow to ensure safe kill operations.
The kill manifold and choke manifold are both designed as per API 16C and can be used together. It is available in several working pressure ratings.
Usage requirements state that all components must match the BOP stack working pressure and the kill manifold should not be used as a daily drilling fluid pipeline.
Specifications
| Design standard | API 16C |
|---|---|
| Pressure ratings | 14MPa, 21MPa, 35MPa, 70MPa |
| Main components | Check valves, gate valves, pressure gauges, pipelines |
| Connections | One end to drilling spool; other end to pump |
| Usage notes | Working pressure to match BOP stack; not for daily drilling fluid pipeline |
Applications
- Allows injection of heavy drilling fluid to balance well pressure
- Check valves prevent backflow during operations
- Can be used together with a choke manifold
Questions buyers ask
What is the kill manifold used for?
It is used to pump heavy drilling fluid into the well to balance pressure so that well kick and blowout can be prevented; it can also release wellhead pressure and inject extinguishing agents.
What components make up the kill manifold?
It consists of check valves, gate valves, pressure gauges and pipelines.
What standards does it meet?
The kill manifold is designed as per API 16C and can be used together with a choke manifold.
What working pressure options are available?
Available pressure ratings are 14MPa, 21MPa, 35MPa and 70MPa.
Are there any usage requirements?
All components must match the BOP stack working pressure, and the kill manifold should not be used as a pipeline for daily drilling fluid injection.
Tell us what you need to produce.
Send your product, capacity and destination port. We reply with matched suppliers, specifications and a quotation.